Juansith contacted me to build him one of the thin neck V2s like my original one with a CF and RGGB plus a rumble motor.
-Ledengin RGGB (gg in series for main color rb in series for FoC)
-radioshack rumble motor with an off switch in the pommel. The motor is hooked up to the LED output on the CF (well the pad below it) so that it copies the blade with its rumble. I just wired a switch in series with the ground so it could be turned off it he wanted to. Its not on a separate circuit that has to be turned on and off each time you want to use it.
-working graflex clamp to access the kill key/recharge port
-pressure switches for activation and aux buttons
-2x LiIon 14500 batteries
-pastorjedi V2 kit
-clear powder coat over all of it to protect the weathering
I will get a video later after I do some final settings on the CF.
here are the pics (click to enlarge)